I built the main body of this dresser and all the drawers using ¾” birch plywood. . This project calls for using 3 sheets, but if you have some scraps, you can probably get away with … See more

Once the glue was dry on the main body, I cut and installed a middle divider panel. I cut this so that it was 1” narrower than the main dresser body so that I could install it 1” inset fro… See more

I used scrap plywood for this, but you could also use 1x3s or a similar size board. They don’t have to be an exact width as they’re mainly just for looks. . I found some thin strips in m… See more

I used 6 pair of 16″ ball bearing drawer slides for this DIY modern dresser build. I’ve got a detailed guide here about installing drawer slides, but I just installed these 1” ins… See more

I installed these drawer fronts using 1 ¼” wood screws from the inside of the drawer boxes so that they covered the drawer box openings and were ⅛” from the dresser sides. The … See more